Metrika članka

  • citati u SCindeksu: 0
  • citati u Google Scholaru:[=>]
  • posete u prethodnih 30 dana:0
  • preuzimanja u prethodnih 30 dana:0
članak: 1 od 1  
Journal of Applied Engineering Science
2017, vol. 15, br. 4, str. 505-508
jezik rada: engleski
vrsta rada: izvorni naučni članak
doi:10.5937/jaes15-14232


Static modeling of the dimensional chains of the hole center-finders
(naslov ne postoji na srpskom)
Saint Petersburg National Research University of Information Technologies, Mechanics and Optics, Saint Petersburg, Russia

e-adresa: kulogorw49@yandex.ru

Sažetak

(ne postoji na srpskom)
The article is devoted to estimate the center-finders accuracy for holes of large-sized case details. Methodology for analyzing center-finders accuracy using dimensional chains and computational mathematics is proposed. It is shown that the quality classes calculated for a direct task can be extended. The methodology is applied to estimate the accuracy of center-finders with typical construction using the example of the specified tolerances for the deviation from alignment in the turbine K-300-240 and the diesel engine 10D100. As a result of calculating the dimensional chain for a direct task, the following values are obtained: 5 quality class for the first case, and 6 for the second case. To check for the inverse task, a computer program that calculates the closing link by the Monte Carlo method with Gaussian distribution is written. Based on the mutual influence of the center-finder supports, tolerances can be extended to 6 and 7 respectively, without accuracy loss.

Ključne reči

Center-finder; Dimensional chain; Monte Carlo method; Mathematical modeling

Reference

*** (2009) Steam turbine K-300-240-1 LMZ: Technical conditions for overhaul: Norms and requirements. Moscow, In Russian
*** (2012) State standart 2.308 - 2011: Indications of the tolerances of the shape and arrangement of surfaces. Moscow: Standartinform Publ, In Russian
*** (1987) Methodical instructions: Chains are dimensional: Basic concepts: Methods for calculating linear and angular chains. Moscow, RD 50-635-87, Publishing Standards, In Russian
Altuhov, V.Y.A. (1989) Mechanization and automation of maintenance and repair of rolling stock. Moscow, Transport Publ. (In Russian)
Gavrilov, A.V., Klimenkov, S.V., Tsopa, E.A. (2010) Programming in Java: Lecture notes. SPb: SPbNRU ITMO, In Russian
Mikhailov, G.A., Voitishchev, A.V. (2006) Numerical static modeling: Monte Carlo methods. Moscow: Publishing Center Academy, In Russian
Palei, M.A., Romanov, A.B., Braginsky, V.A., and others (2001) Tolerances and fits. SPb: Politechnica Publ, In Russian
Putyato, A.V., Kovalenko, A.V. (2008) Calculation of dimensional chains. Gomel: BelGUT Publ, In Russian
Tabakov, S.V., Postovalova, A.A. (2009) Engineering geodesy. Khabarovsk: Publishing house of the FESTU, In Russian
Valetov, V.A., Murashko, V.A. (2006) Fundamentals of instrument technology. St. Petersburg: SPbNRU ITMO, In Russian