Metrika članka

  • citati u SCindeksu: 0
  • citati u CrossRef-u:0
  • citati u Google Scholaru:[=>]
  • posete u prethodnih 30 dana:0
  • preuzimanja u prethodnih 30 dana:0
članak: 1 od 1  
Telfor Journal
2017, vol. 9, br. 2, str. 98-103
jezik rada: engleski
vrsta rada: neklasifikovan
doi:10.5937/telfor1702098C


An automated environment for hardware testing using PXI instrumentation and LabVIEW software
(naslov ne postoji na srpskom)
Univerzitet u Beogradu, Institut 'Mihajlo Pupin', Beograd

e-adresa: vladimir.catic@pupin.rs, natalija.lukic@pupin.rs,

Projekat

Povećanje energetske efikasnosti i raspoloživosti u sistemima za proizvodnju i prenos električne energije razvojem novih metoda za dijagnostiku i ranu detekciju otkaza (MPNTR - 32038)
Integrisani sistem za detekciju i estimaciju razvoja požara praćenjem kritičnih parametara u realnom vremenu (MPNTR - 44003)

Sažetak

(ne postoji na srpskom)
Reliable and fast testing was a requirement in the serial production of the advanced wireless microphone MIKME. Hence, a system for automatic testing, fully adapted for the product, was developed. The system comprises: 1) a specially designed test fixture - bed-of-nails, on which the device under test is placed, 2) the PXI platform and 3) an application developed in LabVIEW environment. Throughout the design of this system the goal was to achieve maximal automation of the entire test procedure in order to minimize the influence of human factor, and therefore save time and significantly reduce the possibility of error.

Ključne reči

automated hardware testing; LabVIEW; PXI; test procedures; virtual instrumentation

Reference

*** (2009) Designing Automated Test Systems: A Practical Guide to Software-Defined Test Engineering, National Instruments
*** (2013/2014) INGUN test fixtures catalog. Available: http://ingun.com
Catic, V.D., Lukic, N.M., Salom, I.M., Ristic, V.P., Kabovic, M.M., Nenadic, N.M. (2016) An automated environment for hardware testing using PXI instrumentation and LabVIEW software. u: 2016 24th Telecommunications Forum (TELFOR), Institute of Electrical and Electronics Engineers (IEEE), str. 1-4
Circuit Check Inc Design guide: Introduction to automated test fixtures
Ferenc, G., Nenadić, N., Pavlović, M., Trailović, S., Ristić, V. (2015) MIKME: Wireless microphone. Institute Mihailo Pupin, Technical Report
Maxim Integrated (2001) Automatic test equipment on a budget. Tutorial 761, Available: https://www.maximintegrated.com/en/app-notes/index.mvp/id/761
National Instruments Corporation (2012) LabVIEW professional development system. ver
Nešković, M., Spasić, J., Čelebić, V., Salom, I. (2010) An automated hardware testing using PXI hardware and LabVIEW software. u: 5th European Conference on Circuits and Systems for Communications ECCSC, Conf. Proc. Belgrade, Serbia, November 23-25, pp. 232-235
Radulović, M. (2009) Design of an automated test system for a device in a production line. University of Belgrade-School of Electrical Engineering, Master thesis, in Serbian
Toku, H. A. (2013) Developing new Automatic Test Equipments (ATE) using systematic design approaches. u: 2013 IEEE AUTOTESTCON, Institute of Electrical and Electronics Engineers (IEEE), str. 1-7