Akcije

Balkan Journal of Stomatology
kako citirati ovaj članak
podeli ovaj članak

Metrika

  • citati u SCIndeksu: 0
  • citati u CrossRef-u:0
  • citati u Google Scholaru:[]
  • posete u poslednjih 30 dana:10
  • preuzimanja u poslednjih 30 dana:0

Sadržaj

članak: 2 od 9  
Back povratak na rezultate
2013, vol. 17, br. 1, str. 9-17
Sealant retention in pits and fissures: Preparation and application techniques: A literature review
(naslov ne postoji na srpskom)
Aristotle University of Thessaloniki School of Dentistry, Thessaloniki, Greece

e-adresavasiatzifa@gmail.com
Sažetak
(ne postoji na srpskom)
The effectiveness of sealants as a preventive measure has been well established. However, the desirable successful outcome depends on retention and, therefore, on the factors contributing to this. The purpose of this literature review is to highlight the most significant factors connected with preparation and application of the sealant materials and any consensus that exists about their contribution to the longevity of the sealant. The preparation of the surface is a matter of great importance, the choice of the cleaning method before etching, and its relevance to retention, remains the subject of discussion. Techniques such as air abrasion, laser, and mechanical preparation have been proposed and applied with varying results. Application techniques are also a controversial area, especially when it comes to the use of self adhesive agents and special bonding agents. Other factors, however, have also been the subject of study in the literature. These include the state of eruption, the nature of isolation, type of the tooth, the profile of the operator and the kind of sealant. More long-term clinical trials are needed to examine the relationship between preparation and application process and retention in order to achieve the desired aim of improved clinical success rates.
Reference
*** (2010) Irish Oral Health Services Guideline Initiative. Pit and Fissure Sealants: Evidence-based guidance on the use of sealants for the prevention and management of pit and fissure caries. available at. http://ohsrc.ucc.ie/html/guidelines.html
Ahovuo-Saloranta, A., Hiiri, A., Nordblad, A., Mäkelä, M., Worthington, H.V. (2008) Pit and fissure sealants for preventing dental decay in the permanent teeth of children and adolescents. Cochrane Database Syst Rev, 8(4):CD001830
Aleksejuniene, J., Brondani, M.A., Pattanaporn, K., Brukiene, V. (2010) Best practices for dental sealants in community service-learning. Journal of dental education, 74(9): 951-60
Arhakis, A., Damianaki, S., Toumba, K.J. (2007) Pit and fissure sealants: Types, effectiveness, retention, and fluoride release: A literature review. Balkan Journal of Stomatology, vol. 11, br. 3, str. 151-162
Asselin, M., Sitbon, Y., Fortin, D., Abelardo, L., Rompre, P.H. (2009) Bond strength of a sealant to permanent enamel: evaluation of 3 application protocols. Pediatric dentistry, 31(4): 323-8
Asselin, M., Fortin, D., Sitbon, Y., Rompré, P.H. (2008) Marginal microleakage of a sealant applied to permanent enamel: evaluation of 3 application protocols. Pediatric dentistry, 30(1): 29-33
Autio-Gold, J.T. (2002) Clinical evaluation of a medium-filled flowable restorative material as a pit and fissure sealant. Oper Dent, 27(4): 325-9
Azarpazhooh, A., Main, P.A. (2008) Pit and fissure sealants in the prevention of dental caries in children and adolescents: a systematic review. Journal (Canadian Dental Association), 74(2): 171-7
Beauchamp, J., Caufield, P.W., Crall, J.J., Donly, K., Feigal, R., Gooch, B., Ismail, A., Kohn, W., Siegal, M., Simonsen, R. (2008) American Dental Association Council on Scientific Affairs. Evidence-based clinical recommendations for the use of pit-and-fissure sealants: a report of the American Dental Association Council on Scientific Affairs. J Am Dent Assoc, 139: 257-268
Bendinskaite, R., Peciuliene, V., Brukiene, V. (2010) A five years clinical evaluation of sealed occlusal surfaces of molars. Stomatologija / issued by public institution 'Odontologijos studija' ... [et al.], 12(3): 87-92
Blackwood, J.A., Dilley, D.C., Roberts, M.W., Swift, E.J. (2002) Evaluation of pumice, fissure enameloplasty and air abrasion on sealant microleakage. Pediatric dentistry, 24(3): 199-203
Boksman, L., McConnell, R.J., Carson, B., McCutcheon-Jones, E.F. (1993) A 2-year clinical evaluation of two pit and fissure sealants placed with and without the use of a bonding agent. Quintessence Int, 24(2): 131-3
Borsatto, M.C., Thomaz, M.Y., Contente, M.M.M.G., Gomes-Silva, J.M., de Mellara, T.S., Galo, R., Palma-Dibb, R.G. (2010) Bonding agent underneath sealant: shear bond strength to oil-contaminated. Brazilian Dental Journal, 21(1): 50-54
Burbridge, L., Nugent, Z., Deery, C. (2006) A randomized controlled trial of the effectiveness of a one-step conditioning agent in sealant placement: 6-month results. International Journal of Paediatric Dentistry, 16(6): 424-430
Burrow, M., Burrow, J., Makinson, O. (2001) Pits and Fissures: Etch Resistance in Prismless Enamel Walls. Australian Dental Journal, 46(4): 258-262
Celiberti, P., Lussi, A. (2007) Penetration ability and microleakage of a fissure sealant applied on artificial and natural enamel fissure caries. Journal of Dentistry, 35(1): 59-67
Celiberti, P., Lussi, A. (2005) Use of a self-etching adhesive on previously etched intact enamel and its effect on sealant microleakage and tag formation. Journal of Dentistry, 33(2): 163-171
Collette, J., Wilson, S., Sullivan, D. (2010) A study of the Isolite system during sealant placement: efficacy and patient acceptance. Pediatric dentistry, 32(2): 146-50
Corona, S.A.M., Borsatto, M.C., Garcia, L., Ramos, R.P., Palma-Dibb, R.G. (2005) Randomized, controlled trial comparing the retention of a flowable restorative system with a conventional resin sealant: one-year follow up. International Journal of Paediatric Dentistry, 15(1): 44-50
Dennison, J.B., Straffon, L.H., More, F.G. (1990) Evaluating tooth eruption on sealant efficacy. Journal of the American Dental Association, 121(5): 610-4
Dental sealants (1997) ADA Council on Access, Prevention and Interprofessional Relations; ADA Council on Scientific Affairs. J Am Dent Assoc, 128: 485-488
dos Santos, K.T., Sundfeld, R.H., Garbin, C.A.S., de Alexandre, R.S., Sundefeld, M.L.M.M., Ceolim, B.N. (2008) Length of resin tags in pit-and-fissure sealants: all-in-one self-etching adhesive vs phosphoric acid etching. Compendium of continuing education in dentistry, 29(3): 186-92
Duangthip, D., Lussi, A. (2003) Effects of fissure cleaning methods, drying agents, and fissure morphology on microleakage and penetration ability of sealants in vitro. Pediatr Dent, 25(6): 527-33
Duangthip, D., Lussi, A. (2004) Effects of application techniques and fissure types on the in vitro performance of two fissure sealants. Am J Dent, 17(2): 137-42
Eklund, S.A., Ismail, A.I. (1986) Time of development of occlusal and proximal lesions: Implications for fissure sealants. J Public Health Dent, 46(2): 114-21
Ellis, R.W., Latta, M.A., Westerman, G.H. (1999) Effect of air abrasion and acid etching on sealant retention: an in vitro study. Pediatric dentistry, 21(6): 316-9
Feigal, R.J. (1998) Sealants and preventive restorations: Review of effectiveness and clinical changes for improvement. Pediatr Dent, 20(2): 85-92
Feigal, R.J., Hitt, J., Splieth, C. (1993) Retaining sealant on salivary contaminated enamel. Journal of the American Dental Association, 124(3): 88-97
Feigal, R.J., Musherure, P., Gillespie, B., Levy-Polack, M., Quelhas, I., Hebling, J. (2000) Improved Sealant Retention with Bonding Agents: A Clinical Study of Two-bottle and Single-bottle Systems. Journal of Dental Research, 79(11): 1850-1856
Feigal, R.J., Donly, K.J. (2006) The use of pit and fissure sealants. Pediatric dentistry, 28(2): 143-50; discussion 192-8
Folke, B.D., Walton, J.L., Feigal, R.J. (2004) Occlusal sealant success over ten years in a private practice: comparing longevity of sealants placed by dentists, hygienists, and assistants. Pediatric dentistry, 26(5): 426-32
Francescut, P., Lussi, A. (2006) Performance of a conventional sealant and a flowable composite on minimally invasive prepared fissures. Operative dentistry, 31(5): 543-50
Fuks, A.B., Kupietzky, A. (2007) Assessment of two curing systems in a self-etching primer/adhesive sealant: A preliminary study for a clinical trial. European Archives of Paediatric Dentistry, 8(3): 171-174
Garcia-Godoy, F., de Araujo, F.B. (1994) Enhancement of fissure sealant penetration and adaptation: the enameloplasty technique. Journal of clinical pediatric dentistry, 19(1): 13-8
Geiger, S.B., Gulayev, S., Weiss, E.I. (2000) Improving fissure sealant quality: mechanical preparation and filling level. Journal of Dentistry, 28(6): 407-412
Gillet, D., Nancy, J., Dupuis, V., Dorignac, G. (2002) Microleakage and penetration depth of three types of materials in fissure sealant: self-etching primer vs etching: an in vitro study. Journal of clinical pediatric dentistry, 26(2): 175-8
Gomes-Silva, J.M., Torres, C.P., Contente, M.M.M.G., de Oliveira, M.A.H.M., Palma-Dibb, R.G., Borsatto, M.C. (2008) Bond strength of a pit-and-fissure sealant associated to etch-and-rinse and self-etching adhesive systems to saliva-contaminated enamel: individual vs. simultaneous light curing. Brazilian Dental Journal, 19: 341-347
Grewal, N., Chopra, R. (2008) The effect of fissure morphology and eruption time on penetration and adaptation of pit and fissure sealants: An SEM study. Journal of Indian Society of Pedodontics and Preventive Dentistry, 26(2): 59
Griffin, S.O., Jones, K., Gray, S.K., Malvitz, D.M., Gooch, B.F. (2008) Exploring four-handed delivery and retention of resin-based sealants. Journal of the American Dental Association, 139(3): 281-9; quiz 358
Guba, C.J., Cochran, M.A., Swartz, M.L. (1994) The effects of varied etching time and etching solution viscosity on bond strength and enamel morphology. Oper Dent, 19(4): 146-53
Hassall, D.C., Mellor, A.C. (2001) The sealant restoration: Indications, success and clinical technique. Br Dent J, 191(7): 358-62
Hatibovic-Kofman, S., Butler, S.A., Sadek, H. (2001) Microleakage of three sealants following conventional, bur, and air-abrasion preparation of pits and fissures. International journal of paediatric dentistry, 11(6): 409-16
Hevinga, M.A., Opdam, N.J.M., Bronkhorst, E.M., Truin, G.J., Huysmans, M.C.D.N.J.M. (2010) Long-term performance of resin based fissure sealants placed in a general dental practice. Journal of Dentistry, 38(1): 23-28
Higson, J.F. (1976) Caries prevention in first permanent molars by fissure sealing A 2-year study in 6-8-year-old children. Journal of Dentistry, 4(5): 218-222
Irinoda, Y., Matsumura, Y., Kito, H., Nakano, T., Toyama, T., Nakagaki, H., Tsuchiya, T. (2000) Effect of sealant viscosity on the penetration of resin into etched human enamel. Operative dentistry, 25(4): 274-82
Kanellis, M.J., Warren, J.J., Levy, S.M. (1997) Comparison of air abrasion versus acid etch sealant techniques: six-month retention. Pediatric dentistry, 19(4): 258-61
Kervanto-Seppälä, S., Pietilä, I., Meurman, J.H., Kerosuo, E. (2009) Pit and fissure sealants in dental public health - application criteria and general policy in Finland. BMC Oral Health, 9(1): 5
Knobloch, L.A., Meyer, T., Kerby, R.E., Johnston, W. (2005) Microleakage and bond strength of sealant to primary enamel comparing air abrasion and acid etch techniques. Pediatric dentistry, 27(6): 463-9
Kolavic, G.S., Griffin, S.O., Malvitz, D.M., Gooch, B.F. (2009) A comparison of the effects of toothbrushing and handpiece prophylaxis on retention of sealants. Journal of the American Dental Association, 140(1): 38-46
Lepri, T.P., Souza-Gabriel, A.E., Atoui, J.A., Palma-Dibb, R.G., Pécora, J.D., Milori, C.S.A. (2008) Shear bond strength of a sealant to contaminated-enamel surface: influence of erbium : yttrium-aluminum-garnet laser pretreatment. Journal of esthetic and restorative dentistry, 20(6): 386-92; discussion 393-4
Leskinen, K., Ekman, A., Oulis, C., Forsberg, H., Vadiakas, G., Larmas, M. (2008) Comparison of the effectiveness of fissure sealants in Finland, Sweden, and Greece. Acta odontologica Scandinavica, 66(2): 65-72
Lobo, M.M., Pecharki, G.D., Tengan, C., da Silva, D.D., da Tagliaferro, E.P.S., Napimoga, M.H. (2005) Fluoride-releasing capacity and cariostatic effect provided by sealants. Journal of oral science, 47(1): 35-41
Locker, D., Jokovic, A., Kay, E.J. (2003) Prevention. Part 8: The use of pit and fissure sealants in preventing caries in the permanent dentition of children. British dental journal, 195(7): 375-8
Lupi-Pegurier, L., Muller-Bolla, M., Bertrand, M.F., Ferrua, G., Bolla, M. (2004) Effect of sono-abrasion in the microleakage of a pit and fissure sealant. Oral health & preventive dentistry, 2(1): 19-26
Lygidakis, N.A., Dimou, G., Stamataki, E. (2009) Retention of fissure sealants using two different methods of application in teeth with hypomineralised molars (MIH): a 4 year clinical study. European archives of paediatric dentistry, 10(4): 223-6
Lygidakis, N.A., Oulis, K.I., Christodoulidis, A. (1994) Evaluation of fissure sealants retention following four different isolation and surface preparation techniques: Four years clinical trial. J Clin Pediatr Dent, 19(1): 23-5
Manton, D.J., Messer, L.B. (1995) Pit and fissure sealants: Another major cornerstone in preventive dentistry. Aust Dent J, 40(1): 22-9
Mascarenhas, A.K., Nazar, H., Al-Mutawaa, S., Soparkar, P. (2008) Effectiveness of primer and bond in sealant retention and caries prevention. Pediatric dentistry, 30(1): 25-8
Moslemi, M., Erfanparast, L., Fekrazad, R., Tadayon, N., Tadayon, N., Dadjo, H., Shadkar, M.M., Khalili, Z. (2010) The effect of Er,Cr:YSGG laser and air abrasion on shear bond strength of a fissure sealant to enamel. Journal of the American Dental Association, 141(2): 157-61
Muller-Bolla, M., Lupi-Pégurier, L., Tardieu, C., Velly, A.M., Antomarchi, C. (2006) Retention of resin-based pit and fissure sealants: A systematic review. Community dentistry and oral epidemiology, 34(5): 321-36
Pardi, V., Sinhoreti, M.A.C., Pereira, A.C., Ambrosano, G.M.B., de Meneghim, M. (2006) In vitro evaluation of microleakage of different materials used as pit-and-fissure sealants. Brazilian dental journal, 17(1): 49-52
Perdigão, J., Fundingsland, J.W., Duarte, S., Lopes, M. (2005) Microtensile adhesion of sealants to intact enamel. International Journal of Paediatric Dentistry, 15(5): 342-8
Perdigåo, J., Geraldeli, S. (2003) Bonding Characteristics of Self-etching Adhesives to Intact versus Prepared Enamel. Journal of Esthetic and Restorative Dentistry, 15(1): 32-42
Ram, D., Mamber, E., Fuks, A.B. (2005) Clinical performance of a non-rinse conditioning sealant in three paediatric dental practices: a retrospective study. International Journal of Paediatric Dentistry, 15(1): 61-6
Salama, F.S., Al-Hammad, N.S. (2002) Marginal seal of sealant and compomer materials with and without enameloplasty. International journal of paediatric dentistry, 12(1): 39-46
Selecman, J.B., Owens, B.M., Johnson, W.W. (2007) Effect of preparation technique, fissure morphology, and material characteristics on the in vitro margin permeability and penetrability of pit and fissure sealants. Pediatric dentistry, 29(4): 308-14
Shah, S., Roebuck, E.M., Nugent, Z., Deery, C. (2007) In vitro microleakage of a fissure sealant polymerized by either a quartz tungsten halogen curing light or a plasma arc curing light. International Journal of Paediatric Dentistry, 17(5): 371-7
Smith, W.P.Jr. (2009) Retention of Sealants. Letter. J Am Dent Assoc, 140: 516-517
Söderholm, K.M. (1995) Reactor Paper The Impact of Recent Changes in the Epidemiology of Dental Caries on Guidelines for the Use of Dental Sealants: Clinical Perspectives. Journal of Public Health Dentistry, 55(5): 302-311
Splieth, C.H., Ekstrand, K.R., Alkilzy, M., Clarkson, J., Meyer-Lueckel, H., Martignon, S., Paris, S., Pitts, N.B., Ricketts, D.N., van Loveren, C. (2010) Sealants in dentistry: outcomes of the ORCA Saturday Afternoon Symposium 2007. Caries research, 44(1): 3-13
Straffon, L.H., Dennison, J.B., More, F.G. (1985) Three-year evaluation of sealant: effect of isolation on efficacy. Journal of the American Dental Association, 110(5): 714-7
Sundfeld, R.H., Mauro, S.J., Briso, A.L.F., Sundfeld, M.L.M.M. (2004) Clinical/photographic evaluation of a single application of two sealants after eleven years. Bulletin of Tokyo Dental College, 45(2): 67-75
Türkün, S.L. (2003) Clinical evaluation of a self-etching and a one-bottle adhesive system at two years. Journal of dentistry, 31(8): 527-34
Venker, D.J., Kuthy, R.A., Qian, F., Kanellis, M.J. (2007) Twelve-month Sealant Retention in a School-based Program Using a Self-etching Primer/Adhesive. Journal of Public Health Dentistry, 64(4): 191-197
Wadenya, R.O., Yego, C., Blatz, M.B., Mante, F. (2009) Bond strength and microleakage of a new self-etch sealant. Quintessence international, 40(7): 559-63
Waggoner, W.F., Siegal, M. (1996) Pit and fissure sealant application: Updating the technique. J Am Dent Assoc, 127(3): 351-61, quiz 391-2
Welbury, R., Raadal, M., Lygidakis, N.A. (2004) EAPD guidelines for the use of pit and fissure sealants. European journal of paediatric dentistry, 5(3): 179-84
Yamada, Y., Hossain, M., Shimizu, Y., Kimura, Y., Masuda, Y., Nakamura, Y., Matsumoto, K. (2008) Analysis of surface roughness and microleakage of fissure sealants following organic debris removal with Carisolv. Journal of dentistry, 36(2): 130-7
Yazici, R.A., Kiremitçi, A., Celik, C., Ozgünaltay, G., Dayangaç, B. (2006) A two-year clinical evaluation of pit and fissure sealants placed with and without air abrasion pretreatment in teenagers. Journal of the American Dental Association, 137(10): 1401-5
Yazici, R.A., Karaman, E., Baseren, M., Tuncer, D., Yazici, E., Unlüer, S. (2009) Clinical evaluation of a nanofilled fissure sealant placed with different adhesive systems: 24-month results. Operative dentistry, 34(6): 642-7
Zervou, C., Kugel, G., Leone, C., Zavras, A., Doherty, E.H., White, G.E. (2000) Enameloplasty effects on microleakage of pit and fissure sealants under load: an in vitro study. Journal of clinical pediatric dentistry, 24(4): 279-85
 

O članku

jezik rada: engleski
vrsta rada: pregledni članak
objavljen u SCIndeksu: 24.09.2013.