Metrika članka

  • citati u SCindeksu: 0
  • citati u CrossRef-u:0
  • citati u Google Scholaru:[=>]
  • posete u prethodnih 30 dana:17
  • preuzimanja u prethodnih 30 dana:16
članak: 1 od 2  
Mining and Metallurgy Engineering Bor
2017, br. 3-4, str. 123-138
jezik rada: engleski
vrsta rada: članak
doi:10.5937/mmeb1704123S


Laser beam drilling and cutting of PMMA
(naslov ne postoji na srpskom)
aUniverzitet u Beogradu, Elektrotehnički fakultet
bTechnical College, Novi Beograd
cMetalac A.D., Gornji Milanovac
dUniverzitet u Beogradu, Tehnički fakultet u Boru

e-adresa: milovjani@gmail.com

Sažetak

(ne postoji na srpskom)
Due to its excellent mechanical, chemical and optical properties, also on fatigue, polymethilmetacrylate (PMMA) is widely used for many purposes. PMMA has a reputation as a material that cannot be machined well, but, its elasticity and toughness enable its shaping by the deformation processes. Laser drilling and cutting are also available techniques for PMMA sheets shaping, used when both mechanical and optical PMMA properties must be preserved. In this work, the influence of CO2 laser cutting/drilling on transparent and coloured PMMA surfaces is investigated, as well as by the other laser systems. The cut surfaces were investigated by a light microscopy and, on those surfaces, the average surface roughness Ra was measured. The material zone affected by the laser beam during the cutting process was monitored by a thermal imaging, and theoretical simulations of temperature distribution in this area were performed using the various versions of COMSOL packages.

Ključne reči

PMMA; laser cutting/drilling; surface roughness; thermal imaging; temperature distribution calculations

Reference

*** (2009) Fundamentals of fracture mechanics and structural assessment methods. u: L.M., M.S.S.S. [ur.] Modern Approach to Control and Modes Structure Testing Methods, Belgrade: Faculty of Mechanical Eng, pp. 237-261
Bass, M., ur. (1983) Laser material processing. Amsterdam: North Holland
Black, I. (1998) Laser Cutting of Perspex. Journal of Materials Science Letters, 17(18): 1531-1533
de Marco, C., Eaton, S.M., Suriano, R., Turri, S., Levi, M., Ramponi, R., Cerullo, G., Osellame, R. (2010) Surface Properties of Femtosecond Laser Ablated PMMA. ACS Applied Materials & Interfaces, 2(8): 2377-2384
Gospavić, R. (2007) Belgrade: Faculty of Electrical Engineering, PhD Thesis
Hossain, A., Nukman, Y., Sifullah, A. M. (2016) Effect of Process Parameter in Laser Cutting of PMMA Sheet and ANFIS Modelling for Online Control. MATEC Web of Conferences, 77: 10003
Janićijević, M., Srećković, M., Kaluđerović, B., Bojanić, S., Družijanić, D., Dinulović, M., Kovačević, A. (2013) Characterization of laser beam interaction with carbon materials. Laser Physics, 23(5): 056002
Janićijević, M., Srećković, M., Kaluđerović, B., Dinulović, M., Karastojković, Z., Jovanić, P., Kovačević, Z. (2015) Evaluation of laser beam interaction with carbon based material: Glassy carbon. Chemical Industry and Chemical Engineering Quarterly / CICEQ, vol. 21, br. 1-1, str. 63-69
Kovačević, A., Srećković, M., Gospavić, R., Ristić, S., Jovanić, P. (2007) Laser-PMMA Interaction and Mechanical Stresses. Acta Physica Polonica A, 112(5): 981-986
Krstić, P. (1981) Multiphoton ionization processes in strong laser fields. City University of New York, Ph. D. Thesis
Krueger, J., Martin, S., Maedebach, H., Urech, L., Lippert, T., Wokaun, A., Kautek, W. (2005) Femto and nanosecond laser treatment of doped laser polymethylmetcrilate. Apl Surf. Scien, Vol. 247, pp. 406-411
Latinovic, Z., Sreckovic, M., Janicijevic, M., Ilic, J., Radovanovic, J. (2014) Numerical modelling of thermal effects on biological tissue during laser-material interaction. Physica Scripta, T162: 014041
Mirkin, A.J. (1975) Physical basis of material processing by laser beams. Mosque - University, in Russian
Ndeda, R., Kioni, P.N., Keraita, J.N. Effect of laser parameters on PMMA during laser micromachining: A FEMLAB simulation. u: Sustainable Research and Innovation, 2011 Mechanical Engineering Conference, Vol. 2, 5th-6th May 2011, Proceedings, pp. 49-53
Ristić, S., Srećković, M. (1992) The implementation of lasers in rheological investigation and optimization of holographic interferogram. OPTO; Proc, pp. 186-193(1), 14-16 avr
Simić, B., Knežević, D., Srećković, M., Nikolovski, D. (2013) Contemporary problems of thermal imaging, modeling and application. Tehnika, vol. 68, br. 2, str. 272-284
Spalding, B., Afgan, N.H. (1981) Heat and mass transfer during solidifications. u: Heat and Mass Transfer in Metallurgical Systems, Washington: Hemisphere Publ. Corp
Speka, M., Matteï, S., Pilloz, M., Ilie, M. (2008) The infrared thermography control of the laser welding of amorphous polymers. NDT & E International, 41(3): 178-183
Srećković, M., Bugarinović, A., Tomić, Ž., Kovačević, A., Rajković, V. (2012) Laser interaction with material: Theory, experiment and reality. Belgrade: Regional Center for Talents, II, pp. 246-329, in Serbian
Srećković, M., Vulićević, Lj., Rajković, V., Tomić, Ž. (2004) Guide of Laser Damages. Čačak: Technical Faculty
Srećković, M., Vulićević, Lj., Bojanić, S., Rajković, V., Ristić, S. (1998) Contribution to Prognosys of Laser treatment Efficiency for Different Materials. Journal of Optics, India, 27, pp. 19-31
Srećković, M., Ilić, J., Davidović, M., Djokić, B., Tomić, Ž., Latinović, Z., Družijanić, D. (2009) Laser Interaction with Material - Theory, Experiments and Discrepancies. Acta Physica Polonica A, 116(4): 618-621
Srećković, M., Kovačević, A., Bojanić, S., Vulićević, Lj., Ristić, S., Rajković, V. (2001) Damages induced by laser beams in organic materials. Laser Phys, Vol. 11, No. 3, pp. 336-342
Srećković, M., Kovačević, A., Davi-dović, M., Dinulović, M., Kutin, M., Milosavljević, A., Djokić, B. (2006) Heating phenomena and approaches for active and passive materials. u: SPIG 2006, Kopaonik - Serbia, Proceedings Book, pp. 243-247
Stević, Z., Rajčić-Vujasinović, M., Antić, D. (2008) Thermal Imaging Application. Bor: Technical Faculty Bor, pp. 55-127; in Serbian
Weiner, J., Ho, P.T. (2003) Light-matter interaction, vol. 1: Fundamentals and applications. Hoboken, New Jersey: John Wiley and Sons
Wood, R.M. (1986) Laser Damage in Optical Material. Bristol: Adam Hilger