Joggle lap shear testing of deep occlusal composite restorations lined with Dycal, Dycal LC, conventional or resin-modified glass ionomer

Stojanovska, Vera; Ivanoff, Chris S.; Muratovska, Ilijana; Popovska, Lidija; Garcia-Godoy, Franklin; Hottel, Timothy L.; Marković, Dejan Lj.; Morrow, Brian R.

doi:10.2298/VSP150816226S

Akcije

dodaj u Moj izbor [0]

kako citirati ovaj članak
prikaži na oba jezika
podeli ovaj članak

Direktan link

Metrika

citati u SCIndeksu: 0
citati u CrossRef-u:0
citati u Google Scholaru:[]
posete u poslednjih 30 dana:2
preuzimanja u poslednjih 30 dana:0

Sadržaj

članak: 4 od 34

povratak na rezultate

Vojnosanitetski pregled

2017, vol. 74, br. 5, str. 410-419

Testiranje spojnog smicanja dubokih okluzalnih kompozitnih restauracija postavljenih preko podloge od Dycal, Dycal LC, konvencionalnog ili smolom modifikovanog glas-jonomer cementa

Stojanovska Vera^a, Ivanoff Chris S.^b, Muratovska Ilijana^a, Popovska Lidija^a, Garcia-Godoy Franklin^b, Hottel Timothy L.^c, Marković Dejan Lj.^d

, Morrow Brian R.^b

^aDepartment of Cariology and Endodontics, Faculty of Dentistry, Sts. Cyril and Methodius University, Skopje, Macedonia
^bDepartment of Bioscience Research, College of Dentistry, University of Tennessee, Memphis, TN, USA
^cDepartment of Prosthodontics, College of Dentistry, University of Tennessee, Memphis, TN, USA
^dUniverzitet u Beogradu, Stomatološki fakultet, Klinika za dečiju i preventivnu stomatologiju

e-adresa: civanoff@uthc.edu

Ključne reči: biomehanika; dentin; vezivna sredstva; adhezivi; zub; cement; kalcijum hidroksid; materijali; testiranje; in vitro

Sažetak

Uvod/Cilj. Trajnost zubnih nadoknada može se donekle predvideti vstom adhezivne sposobnosti materijala i može se meriti testiranjem snage adhezije restorativnih materijala i zubnih struktura. Cilj ove studije bio je da se da se testira preklapanje spoja koji povezuje zub i biomehaničku jedinicu i da se uporedi jačina veze okluzalnih kompozitnih ispuna postavljenih u duboke kavitete preko podloge od Dycal, Dycal LC, konvencionalnog ili smolom-modifikovanog glas-jonomer cementa. Metode. Ukupno 150 standardizovanih okluzalnih kaviteta bilo je podeljeno u pet grupa (n = 30): I - kaviteti premazani adhezivom (ExciTE®F) i direktno ispunjeni kompozitom (TetricEvoCeram); II i III - kaviteti sa podlogom od Dycal ili Dycal LC pre postavljanja kompozitnog materijala; IV i V - uzorci sa bazom od Fuji IX ili Fuji II LC (n = 30). Jačina vezivne snage određena je pomoću univerzalne mašine, a način neuspeha (adhezivna, kohezivna, mešovita fraktura) određen je stereomikroskopom. Srednje vrednosti su analizirane pomoću ANOVA testa (p < 0,05), a značajnost razlika između grupa analizirana je Student-ovim t-testom. Rezultati. Jačina vezivne snage (MPa) kompozitnih ispuna u kavitetima bez podloge (23,91 ± 4,54) bila je veća u poređenju sa ispunima postavljenim preko Fuji II LC (17,45 ± 2,74), Fuji IX (8,76 ± 2,57), Dycal LC (13,07 ± 1,84) ili Dycal (6.12 ± 1.28). Zaključak. Smicanje ili pomaknuće okluzalnih kompozitnih ispuna u dubokim kavitetima bez lajnera je veće nego u kavitetima postavljenim preko Fuji II LC > Fuji IX > Dycal LC > Dycal.

Abstract

Background/Aim. The longevity of a dental restoration may be predicted to some degree by its adhesive ability, and this, in turn, can be measured by bond strength testing between restorative materials and tooth structure. The aim of this study was to test an innovative joggle lap shearing jig that integrates the tooth and the entire biomechanical unit into testing, to compare the shear bond strengths of Class I occlusal composite restorations in deep cavity preparations lined with Dycal, Dycal LC, conventional glass ionomer or resin-modified glass ionomer. The mode of failure (adhesive, cohesive, mixed) after debonding was determined by stereomicroscopy. Methods. A total of 150 standardized occlusal cavities were prepared and divided into five groups. The group I cavities (n = 30) were coated with adhesive (ExciTE®F) and filled directly with composite (TetricEvoCeram). The group II and III cavities were lined with Dycal (n = 30) or Dycal LC (n = 30) before placing composite. The groups IV and V specimens were based with Fuji IX (n = 30) or Fuji II LC (n = 30). Shear bond strengths were determined with a universal testing machine and fractured bonding sites were analyzed under stereomicroscope. The mean bond strengths were analyzed using one-way ANOVA test (p < 0.05) and the means between the groups were analyzed with Student's t-test. Results. The shear bond strength (MPa) of composite restorations in cavities without base (23.91 ± 4.54) was higher than cavities lined with Fuji II LC (17.45 ± 2.74), Fuji IX (8.76 ± 2.57), Dycal LC (13.07 ± 1.84) or Dycal (6.12 ± 1.28). The results using the jogged lap shearing jig were consistent with the literature. Conclusion. The shear bond strength of occlusal composite restorations in deep cavities without liners was greater than cavities lined with Fuji II LC > Fuji IX > Dycal LC > Dycal.

	Reference
	*** (2003) Dental materials: Testing of adhesion to tooth structure: ISO/TS 11405. [published on 2003 February 1]. Available from: www.iso.org/iso/catalogue_detail.htm?csnumber
	Abreu, C.W., Santos, J.F., Passos, S.P., Michida, S.M., Takahashi, F.E., Bottino, M.A. (2011) The influence of cutting speed and cutting initiation location in specimen preparation for the microtensile bond strength test. J Adhes Dent, 13(3); 221-6
	Allanigue, C.M., Rapp, R., Piesco, N.P., Elliott, M.A., Nirschl, R.F., Guevara, P.A., i dr. (1986) Adaptation of composite resin restorative materials to retentive grooves of Class I cavity preparations. Pediatr Dent, 8(3); 147-52
	Armstrong, S., Geraldeli, S., Maia, R., Raposo, L.H.A., Soares, C.J., Yamagawa, J. (2010) Adhesion to tooth structure: A critical review of “micro” bond strength test methods. Dental Materials, 26(2): e50-e62
	Bell, R. B., Barkmeier, W.W. (1994) Glass-ionomer restoratives and liners: shear bond strength to dentin. Journal of Esthetic and Restorative Dentistry, 6(3): 129-134
	Bona, Á.D., Pinzetta, C., Rosa, V. (2007) Effect of acid etching of glass ionomer cement surface on the microleakage of sandwich restorations. Journal of Applied Oral Science, 15(3): 230-234
	Braga, R.R., Meira, J.B.C., Boaro, L.C.C., Xavier, T.A. (2010) Adhesion to tooth structure: A critical review of “macro” test methods. Dental Materials, 26(2): e38-e49
	Braz, R., Sinhoreti, M.A., Spazzin, A.O., Loretto, S.C., Lyra, A.M., Meira-Júnior, S.A.D. (2010) bond strength test using different loading conditions: A finite element analysis. Braz J Oral Sci, 9(4); 439-42
	Burger, K.M., Cooley, R.L., Garcia-Godoy, F. (1992) Effect of Thermocycling Times on Dentin Bond Strength bond. Journal of Esthetic and Restorative Dentistry, 4(6): 197-198
	Cheung, G. (1990) An in vitro evaluation of five dentinal adhesives in posterior restorations. Quintessence Int, 21(6): 513−6
5	Davidson, C.L., de Gee, A.J., Feilzer, A. (1984) The competition between the composite-dentin bond strength and the polymerization contraction stress. J Dent Res, 63(12): 1396-9
	de Munck, J., Mine, A., Poitevin, A., van Ende, A., van Meerbeek, B. (2010) Testing bond strength: A review of the literature. Dental Materials, 26(2): e139-e140
	DeHoff, P.H., Anusavice, K.J., Wang, Z. (1995) Three-dimensional finite element analysis of the shear bond test. Dental Materials, 11(2): 126-131
	Dickens, S.H., Kelly, S.R., Flaim, G.M., Giuseppetti, A.A. (2004) Dentin adhesion and microleakage of a resin-based calcium phosphate pulp capping and basing cement. European Journal of Oral Sciences, 112(5): 452-457
1	Dominguez, M.S., Witherspoon, D.E., Gutmann, J.L., Opperman, L.A. (2003) Histological and scanning electron microscopy assessment of various vital pulp-therapy materials. J Endod, 29(5): 324-33
	El-Askay, F.M., Nassif, M.S., Andrade, A.M., Reis, A., Loguercio, A.D. (2012) Effect of surface area and air drying distance on shear strength of etch-and-rinse adhesive. Braz Oral Res, 26: 418-23
1	Estrela, C., Holland, R. (2003) Calcium hydroxide: study based on scientific evidences. Journal of Applied Oral Science, 11(4): 269-282
	Foong, J., Lee, K., Nguyen, C., Tang, G., Austin, D., Ch`ng, C., Burrow, M., Thomas, D. (2006) Comparison of microshear bond strengths of four self-etching bonding systems to enamel using two test methods. Australian Dental Journal, 51(3): 252-257
	Fortin, D., Vargas, M.A., Swift, E.J. (1995) Bonding of resin composites to resin-modified glass ionomers. Am J Dent, 8(4); 201-4
	Gaengler, P., Hoyer, I., Montag, R. (2001) Clinical evaluation of posterior composite restorations: the 10-year report. J Adhes Dent, 3(2); 185-94
4	Goracci, G., Mori, G. (1996) Scanning electron microscopic evaluation of resin-dentin and calcium hydroxide-dentin interface with resin composite restorations. Quintessence Int, 27(2): 129-35
	Heintz, S.D. (2007) Systematic reviews: I. The correlation between laboratory tests on marginal quality and bond strength. II. The correlation between marginal quality and clinical outcome. J Adhes Dent, 9 Suppl 1: 77-106
	Helvatjoglu-Antoniades, M., Koliniotou-Kubia, E., Dionyssopoulos, P. (2004) The effect of thermal cycling on the bovine dentine shear bond strength of current adhesive systems. Journal of Oral Rehabilitation, 31(9): 911-917
	Hilton, T.J. (2002) Can modern restorative procedures and materials reliably seal cavities?, In vitro investigations. Part 1. Am J Dent, 15(3); 198-210
	Khatri, A., Nandlal, B., Srilatha (2007) Comparative evaluation of shear bond strength of conventional composite resin and nanocomposite resin to sandblasted primary anterior stainless steel crown. Journal of Indian Society of Pedodontics and Preventive Dentistry, 25(2): 82
	Khoroushi, M., Rafiei, E. (2013) Effect of thermocycling and water storage on bond longevity of two self-etch adhesives. Gen Dent, 61(3); 39-44
	Leloup, G., d`Hoore W., Bouter, D., Degrange, M., Vreven, J. (2001) Concise Review Biomaterials & Bioengineering: Meta-analytical Review of Factors Involved in Dentin Adherence. Journal of Dental Research, 80(7): 1605-1614
1	Lin, A., Mcintyre, N.S., Davidson, R.D. (1992) Studies on the adhesion of glass-ionomer cements to dentin. J Dent Res, 71(11): 1836-41
	McDonough, W.G., Antonucci, J., He, J., Shimada, Y., Chiang, M.Y., Schumacher, G.E., Schultheisz, C.R. (2002) A microshear test to measure bond strengths of dentin-polymer interfaces. Biomaterials, 23(17): 3603-3608
2	Miyazaki, M., Sato, M., Onose, H., Moore, B.K. (1998) Influence of thermal cycling on dentin bond strength of two-step bonding systems. Am J Dent, 11(3): 118-22
	Munksgaard, E.C., Irie, M., Asmussen, E. (1985) Dentin-Polymer Bond Promoted by Gluma and Various Resins. Journal of Dental Research, 64(12): 1409-1411
	Murray, P.E., García-Godoy, F. (2006) The incidence of pulp healing defects with direct capping materials. Am J Dent, 19(3); 171-7; 46
	Nujella, B.P., Choudary, M.T., Reddy, S.P., Kumar, M.K., Gopal, T. (2012) Comparison of shear bond strength of aesthetic restorative materials. Contemp Clin Dent, 3(1); 22-6
	Opdam, N.J., Bronkhorst, E.M., Roeters, J.M., Loomans, B.A. (2007) Longevity and reasons for failure of sandwich and total-etch posterior composite resin restorations. J Adhes Dent, 9(5); 469-75
	Pecora, N., Yaman, P., Dennison, J., Herrero, A. (2002) Comparison of shear bond strength relative to two testing devices. Journal of Prosthetic Dentistry, 88(5): 511-515
3	Peumans, M., Kanumilli, P., de Munck, J., van Landuyt, K., Lambrechts, P., van Meerbeek, B. (2005) Clinical effectiveness of contemporary adhesives: a systematic review of current clinical trials. Dental materials, 21(9): 864-81
	Phrukkanon, S., Burrow, M.F., Tyas, M.J. (1998) The influence of cross-sectional shape and surface area on the microtensile bond test. Dental Materials, 14(3): 212-221
	Placido, E., Meira, J.B.C., Lima, R.G., Muench, A., Souza, R.M.de, Ballester, R.Y. (2007) Shear versus micro-shear bond strength test: A finite element stress analysis. Dental Materials, 23(9): 1086-1092
	Raposo, L.H.A., Armstrong, S.R., Maia, R.R., Qian, F., Geraldeli, S., Soares, C.J. (2012) Effect of specimen gripping device, geometry and fixation method on microtensile bond strength, failure mode and stress distribution: Laboratory and finite element analyses. Dental Materials, 28(5): e50-e62
	Salz, U., Bock, T. (2010) Testing adhesion of direct restoratives to dental hard tissue - a review. J Adhes Dent, 12(5); 343-71
	Sano, H., Shono, T., Sonoda, H., Takatsu, T., Ciucchi, B., Carvalho, R., Pashley, D.H. (1994) Relationship between surface area for adhesion and tensile bond strength - Evaluation of a micro-tensile bond test. Dental Materials, 10(4): 236-240
	Schuurs, A. H. B., Gruythuysen, R. J. M., Wesselink, P. R. (2000) Pulp capping with adhesive resin-based composite vs. calcium hydroxide: a review. Dental Traumatology, 16(6): 240-250
	Sinhoreti, M.A.C., Consani, S., de Goes, M.F., Sobrinho, L.C., Knowles, J.C. (2001) Influence of loading types on the shear strength of the dentin-resin interface bonding. Journal of Materials Science: Materials in Medicine, 12(1): 39-44
2	Siqueira, J.F., Rocas, I.N., Abad, E.C., Castro, A.J., Gahyva, S.M., Favieri, A. (2001) Ability of three root-end filling materials to prevent bacterial leakage. J Endod, 27(11): 673-5
	Sirisha, K., Rambabu, T., Shankar, Y., Ravikumar, P. (2014) Validity of bond strength tests: A critical review: Part I. Journal of Conservative Dentistry, 17(4): 305
	Stojanovska, V., Stevanović, M., Mitić, A. (2005) In vitro comparation of shear bond strength of two resin composite to enamel and dentine using Excite® as an adhesive. Acta stomatologica Naissi, vol. 21, br. 50, str. 429-436
	Sudsangiam, S., Do, dentin N.R. (1999) bond strength tests serve a useful purpose. J Adhes Dent, 1(1); 57-67
	Tedesco, T.K., Garcia, E.J., Soares, F.Z.M., Rocha, R.de O., Grande, R.H.M. (2013) Effect of Two Microshear Test Devices on Bond Strength and Fracture Pattern in Primary Teeth. Brazilian Dental Journal, 24(6): 605-609
	Triana, R., Prado, C., Garro, J., García-Godoy, D.F. (1994) bond strength of fluoride-releasing materials. Am J Dent, 7(5); 252-4
2	van Meerbeek, B., Peumans, M., Poitevin, A., Mine, A., van Ende, A., Neves, A., de Munck, J. (2010) Relationship between bond-strength tests and clinical outcomes. Dental Materials, 26(2): e100-e121
2	van Meerbeek, B., Peumans, M., Poitevin, A., Mine, A., van Ende, A., Neves, A., de Munck, J. (2010) Relationship between bond-strength tests and clinical outcomes. Dental Materials, 26(2): e100-e121
9	van Meerbeek, B., de Munck, J., Yoshida, Y., Inoue, S., Vargas, M., Vijay, P., van Landuyt, K., Lambrechts, P., Vanherle, G. (2003) Buonocore memorial lecture. Adhesion to enamel and dentin: Current status and future challenges. Oper Dent, 28(3): 215-35
	van Noort, R., Noroozi, S., Howard, I.C., Cardew, G. (1989) A critique of bond strength measurements. Journal of Dentistry, 17(2): 61-67
	von Fraunhofer, J.A., Marshall, K.R., Holman, B.G. (2006) The effect of base ⁄ liner use on restoration leakage. Gen Dent, 54(2); 106-9

O članku

jezik rada: engleski
vrsta rada: izvorni naučni članak
DOI: 10.2298/VSP150816226S
objavljen u SCIndeksu: 06.05.2017.
metod recenzije: dvostruko anoniman

Povezani članci

Balkan J Dent Med (2017)
In vitro microleakage of class v composite restorations prepared by Er,Cr:YSGG laser and carbide bur
Synarellis Athanasios, i dr.

Stomatološki glasnik Srbije (2003)
Uticaj 'soft start' polimerizacije na kvalitet rubnog zatvaranja kompozitnih ispuna
Blažić Larisa, i dr.

Stomatološki glasnik Srbije (2016)
Evaluacija mikrocurenja novih tečnih kompozita (Dyad Flow) i adheziva baziranih na total-etch i samonagrizajućoj tehnici kod V klase kompozitnih ispuna
Mann Navjot S., i dr.

prikaži sve [26]