- citati u SCIndeksu: 0
- citati u CrossRef-u:0
- citati u Google Scholaru:[
 ]
- posete u poslednjih 30 dana:2
- preuzimanja u poslednjih 30 dana:0
|
|
|
2019, vol. 44, br. 3, str. 69-77
|
|
Uticaj tipa zemljišta na energetske zahteve nekih odabranih poljoprivrednih mašina u jugoistočnoj Nigeriji
Effect of soil type on power and energy requirements of some selected agricultural field machinery in south-east Nigeria
aMichael Okpara University of Agriculture, Department of Agricultural & Bioresources Engineering, Umudike, Umuahia, Abia State, Nigeria bEnugu State University of Science and Technology, Department of Agricultural & Bioresources Engineering, Enugu State, Nigeria
e-adresa: odumaoke@gmail.com
Sažetak
Proučavan je uticaj tipa zemljišta na energetske potrebe nekih odabranih poljoprivrednih mašina (plug, drljača, rotofreza i sejalica) u jugoistočnoj Nigeriji, kako bi se poljoprivrednicima i korisnicima opreme omogućilo da odaberu i na odgovarajući način odgovore veličini opreme i brzini rada za poboljšanje kapaciteta polja na mašinama na osnovu tipova zemljišta (glina - ilovača, ilovasto - peskovito i peskovito - glinoviti tip) na istraživanom području. Rezultati pokazuju da je plug imao najveću potrošnju goriva (energije) od 21,60 l /ha do 24,67 l/ha, zatim drljača sa potrošnjom goriva od 17,21 do 21,66 l/ha, rotofreza od 15,22 do 19,72 l/ha. Najmanja potrošnja je bila kod sadilica sa opsegom potrošnje goriva od 14,42 do 15,62 l/ha. Najveća potrošnja goriva zabeležena je na glinovito-ilovastim tipovima zemljišta, a zatim na peskovito-glinovitom i najmanje na glinovito-peskovitim tipovima zemljišta. Plug ima najveću silu vuče od 10.8 kN/ m, zatim drljača od 10.5 kN/m, pa sadilica od 8.4 kN / m. Najmanja sila vuče je kod rotofreze od 5.1 kN/m. Osim toga, plug je prouzrokovao najveće proklizavanje točkova (15,7%), zatim drljača (13,3%). Rotofreza i sadilica imaju jednake vrednosti proklizavanja točkova (pneumatika) (12,8%). Najmanja vrednost klizanja točkova je kod kultivatora od 12,4%. Peskovito-glinoviti tip zemljišta je imao najveće klizanje pneumatika za sva oruđa, a najmanje klizanje točkova je zabeleženo na zemljištu tipa ilovača. Međutim, svi priključci na različitim zemljištima imaju prosečno proklizavanje točkova ispod gornje granice klizavanja točkova od 20%, što pokazuje da su ovakva zemljišta pogodna za kretanje mašina.
Abstract
The effect of soil type on power and energy requirements of some selected agricultural field machinery (plough, harrow, ridger, rotovator and planter) in south - East Nigeria were studied to enable farmers and users of the equipment select and match appropriately the size of implements and speed of operation to machine (tractor) size to improve the field capacitive performance of the machines based on soil types (clay - loam, loamy - sandy, and sandy - clay soil) in the study area. Results showed that plough recorded the highest fuel (energy) consumption rate of 21.60 l/ha to 4.67 l/ha, followed by harrow with fuel consumption rate of 17.21 to 21.66 l/ha, rotovator (15.22 to 19.72 l/ha) and least was planter with fuel consumption rate range from 14.42 to 15.62 l/ha. The highest fuel consumption was recorded on clay-loam soil, followed by sandy-clay and least was on loamy-sandy soil. The plough also had the highest draft force (10.8 kN/m), followed by the harrow and ridger with equal draft force of 10.5 kN/m, planter (8.4 kN/m) and the least was the rotovator with draft force of 5.1 kN/m. Furthermore, the plough gave the highest wheel slippage (15.7 %) followed by harrow (13.3 %), rotovator and planter with equal value of wheel slippage (12.8 %) and least was ridger with wheel slippage of 12.4 %. Sandy-clay soil recorded the highest tyre slippage for all the implements, followed by loamy-sandy and the least tyre slippage was recorded on clayloam soil. However, all the implements in different soils corded average wheel slippage below the top limit of wheel slippage (20 %), showing that the soils were trafficability.
|
|
|
|
Reference
|
|
1 
|
Alnahas, S.A.M.E. (2003) Tillage Implements Performance and their Effects on Two Types of Soil in Khartoum Area. Thesis submitted to the University of Khartoum in partial fulfillment for the requirement of the Degree of Master of Science in Agricultural Engineering
|
|
|
Ani, A.O., Akubuo, C.O., Odigboh, E.U. (2007) Tractability conditions for disc ploughing on a loamy sand soil in the ilorin agro-ecological zone. Nigeria Journal of technology, 26: 2-8
|
|
1
|
Bukhari, S., Balock, J.M. (1982) Fuel consumption of tillage implements. AMA Japan, 11(3): 20-22
|
|
|
Collins, N.E., Williams, T.H., Kemble, L.J. (1998) Energy requirements for grain production system. ASAE Pub, 407-411,Asia,Africa and L.America 19(4):9-14
|
|
2
|
Hunt, D. (2013) Farm power and machinery management. u: Scientific International Congress on agricultural engineering, agricultural engineering, Dublin, Tenth edition. 3: 1703-1709
|
|
|
Hunt, D.R. (1979) Farm power and machinery management. Lowa State University Press, 4th edition. Second printing
|
|
|
Oduma, O., Oluka, S.I. (2017) Performance Characteristics of Agricultural Field Machineries in South-East Nigeria. J. of Exp. Research, (1): 57-71
|
|
1
|
Oluka, S.I. (2000) Costs of tractor ownership under different management systems in Nigeria. Nigeria Journal of technology (NIJOTECH), 19(1): 15-28
|
|
|
Pensson, S.P.E., Klelgaard, W.L., Wu, Z. (1986) Machine width for time and fuel efficiency. Trans. ASAE, 29: 1508-1513
|
|
1
|
Sale, S.N., Gwarzor, M.A., Felix, O., Idris, S.I. (2013) Performance evaluation of some selected tillage implements. Proc. of NIAE, 34: 71-77
|
|
1
|
Udo, D.U., Akubuo, C.O. (2000) Fuel consumption in tillage operations for sandy loam soil. Proceeding of NIAE, 74-83
|
|
1 
|
Updhyaya, S.K., Williams, T.H., Kemble, L.J., Collins, N.E. (1984) Energy requirements for chiseling in coastal plain soils. Transactions of the ASAE, 27(6): 1643-1649
|
|
|
Yohanna, J.K., Ifem, J.L.C. (2000) Performance evaluation of field efficience of farm machinery in Nasarawa and plateau state. Proceeding of NIAE, 88-92
|
|
|
|
|