Metrics

  • citations in SCIndeks: [1]
  • citations in CrossRef:0
  • citations in Google Scholar:[]
  • visits in previous 30 days:0
  • full-text downloads in 30 days:0

Contents

article: 1 from 1  
2013, vol. 63, iss. 1, pp. 52-62
Influence of explosive composition and structure on shock to detonation transition
Military Technical Institute - MTI, Belgrade
Keywords: shock wave; detonation initiation; mass velocity; cast explosive; pressed explosive; Lagrange velocity gage; GAP test
Abstract
This paper includes the results of the examination of the explosive detonation process development by shock wave initiation. A new method, a modified GAP test, has first been defined for examining the explosive sensitivity to shock waves. The GAP system consists of a flat shock wave generator and an attenuator of polyethylene with a determined shock adiabate. Shock sensitivity is examined for FH-5 and FP-5 explosive charges and for LKE-11 and LKE-15 cast composite explosives using the modified GAP test. The shock to detonation transition (SDT) process was tested in cast composite (LKE-70/10, LKE-11 and LKE-15) and pressed explosives (FH-5 and FP-5) for different values of the shock wave pressure. The distance to detonation and the "Pop-plot" diagram were determined for each explosive composition and shock pressure intensity after the analysis of the obtained results.
References
Anastasijević, S. (1988) Ispitivanje eksplozivnog modela sa preoblikovanim frontom detonacionog talasa. Beograd: VTI, Int.dok. TI-958
Antić, G., Džingalašević, V., Stanković, M., Borković, Z. (2004) Eksplozivne karakteristike livenih PBX na bazi HMX, amonijumperhlorata i aluminijuma. Scientific Technical Review, vol. 54, br. 3-4, str. 38-44
Bowden, F.P., Yoffe, A.D. (1952) Initiation and growth of explosion in liquids and solids. Cambridge Univ. Press
Campbell, A.W., Davis, W.C., Ramsay, J.B., Travis, J.R. (1961) Shock Initiation of Solid Explosives. Physics of Fluids, 4(4): 511
Chaudhri, M.M. (1989) The initiation of fast decomposition in solid explosives by fracture, plastic flow, friction, and collapsing voids. in: 9th Symp. on Det., Portland, Oregon, 857-867
Chidester, S.K., i dr. (1993) A frictional work predictive method for the initiation of solid high explosives from low-pressure impacts. in: 10th Symp. on Det., Boston, Massachusetts, 786-792
Džingalašević, V., Antić, G., Azdejković, M. (2002) Effects of high explosive composition and structure to detonation parameters. in: First Symposium for Explosive Materials, Weapons and Military Technology, Ohrid
Džingalašević, V. (2005) Ispitivanje osetljivosti brizantnih eksploziva na inicijaciju udarnim talasom (GAP test). Beograd, tehn. uputstvo, VTI VTI-004-01-0423
Džingalašević, V. (2010) Ispitivanje osetljivosti eksploziva različitog sastava na inicijaciju udarnim talasom primenom elektromagnetne sonde. Beograd: VTI, VTI-04-01-0616
Džingalašević, V. (1994) Uputstvo za merenje masene brzine udarnog talasa i brzine produkata detonacije primenom elektromagnetne metode sa impulsnim magnetnim poljem. Beograd: VTI
Field, J.E., i dr. (1992) Hot-spot ignition mechanisms for explosives and propellants. Phil. Trans. Soc. Lond. A, 339, 269-283
Frey, R.B. (1981) The initiation of explosive charges by rapid shear. in: 7th Symp. on Det., Annapolis, Maryland, 36-42
Gustavsen, R.L., i dr. (1999) Initiation of EDC37 measured with embedded electromagnetic particle velocity gauges. in: APS Conference on Shock Compression of Condensed Matter, 879-882
Gustavsen, R.L., Sheffield, S.A., Alcon, R.R. (2006) Measurements of shock initiation in the tri-amino-tri-nitro-benzene based explosive PBX 9502: Wave forms from embedded gauges and comparison of four different material lots. Journal of Applied Physics, 99(11): 114907
James, H.R., Lambourn, B.D. (2006) On the systematics of particle velocity histories in the shock-to-detonation transition regime. Journal of Applied Physics, 100(8): 084906
Mader, C.L. (1998) Numerical modeling of explosives and propellants. CRC Press
Mader, C.L. (1965) Initiation of Detonation by the Interaction of Shocks with Density Discontinuities. Physics of Fluids, 8(10): 1811
Sheffield, S.A., i dr. (1999) In-situ magnetic gauging technique used at LANL: Method and shock information obtained. Shock Compr. of Cond. Matter, 1043-1048
Walker, F.E., Wasley, R.J. (1969) Explosivstoffe, 17(1):9
 

About

article language: English
document type: Scientific Paper
published in SCIndeks: 02/09/2013