- citati u SCIndeksu: [4]
- citati u CrossRef-u:0
- citati u Google Scholaru:[
 ]
- posete u poslednjih 30 dana:2
- preuzimanja u poslednjih 30 dana:2
|
|
|
2006, vol. 12, br. 1-2, str. 183-190
|
|
Održavanje i sigurnost složenih tehničkih sistema
Maintainability and safety of complex technical systems
aViša tehnička škola, Čačak
bPlima Pek, Čačak
cUniverzitet u Kragujevcu, Mašinski fakultet, Kraljevo, Srbija
Sažetak
Usled razvoja tehničkih sistema rasla je i njihova složenost, pa je samim tim i održavanje takvih sistema zahtevalo uvođenje novih metoda. Koja vrsta održavanja će biti primenjena zavisi od brojnih faktora, međutim najbolji rezultati se postižu kombinovanjem vise vrsta održavanja. Od održavanja sistema zavisi koliko će neki sistem biti siguran. Sigurnost je naročito značajna kod onih sistema kod kojih usled otkaza može doći do katastrofalnih posledica po ljudske živote, materijalna dobra i životnu sredinu. Najčešće se usled lošeg održavanja i dešavaju katastrofalni događaji (eksplozije, požari izlivanja štetnih materija, odroni itd).
Abstract
Complexity of technical systems was growing with their development and maintainability requires new methods. Different factors influence on choosing maintainability method and optimal results is attending with combination of different maintainability method. Safety depends of maintainability system using. Safety is important in systems where disastrous consequence happened to human life, equipment and environment when failure was occurred. Disasters (explosions, fires, harmful flood, rockslide, etc) mostly occurred with bad maintainability method.
|
|
|
|
Reference
|
|
|
Arendt, J.S., Lorenzo, O.K. (2000) Evaluating process safety in the Chemical industry: A user's guide to quantitative risk analysis. American Institute of Chemical Engineers
|
|
|
Izadi-Zamanabadi, R. (2000) Lecture notes-practical approach to reliability, safety, and active fault-tolerance. Aalborg University, Denmark
|
|
|
Lees, F.P. (1996) Loss prevention in the process industries: Hazard identification, assessment and control. Oxford: Butterworth-Heinemann, Second edition
|
|
|
Marie, A., Robajac, O., Ječmenica, R. (2005) Sigurnost i pouzdanost u funkciji održavanja linije za proizvodnju hleba. u: Naučno-stručni skup o održavanju mašina i opreme (XXIX), Budva, Institut za istraživanja i projektovanja u privredi, str. 171-184
|
|
|
Mauri, J. (2000) Integrated safety analysis techniques, supporting identification of common cause failures. University of York, Doctoral Thesis
|
|
|
Peng, W. (2003) Incident reporting systems in process industries in Sweden. Lulea, Sweden: University of Technology, Master Thesis
|
|
|
Purvis, M., Bauler, J. (2004) Irresponsible care: The failure of the chemical industry to protect the public from chemical accidents. U.S. Public Interest Research Group Education Found
|
|
|
|
|