Akcije

Journal of Applied Engineering Science
kako citirati ovaj članak
podeli ovaj članak

Metrika

  • citati u SCIndeksu: 0
  • citati u CrossRef-u:0
  • citati u Google Scholaru:[]
  • posete u poslednjih 30 dana:4
  • preuzimanja u poslednjih 30 dana:1

Sadržaj

članak: 4 od 74  
Back povratak na rezultate
2021, vol. 19, br. 4, str. 996-1012
Investigation the effects of green mortar parameters using analytical methods
(naslov ne postoji na srpskom)
Northern Technical University, Technical College of Mosul, Building and Construction Department, Mosul, Iraq

e-adresaEethardawood@ntu.edu.iq
Ključne reči: green mortar; environmental effects; regression analysis; AHP; TOPSIS
Sažetak
(ne postoji na srpskom)
The various green mortar mixes have been used in this study using various percentages of waste glass powder (WGP), steel slag (SG) and Micro-silica fume(SF). The different properties of flow, density, ultrasonic pulse velocity (UPV), compressive and flexural strengths have been tested for such green mortar in the first phase of experimental work. The second phase deals with the regression analysis of such properties. Whereas, the analysis of the results have also been using the integrated AHP and TOPSIS methods for selection the best performance of the green mortar due to the ecological effects of such materials. The results showed that the use of 70%OPC+8%WGP+12%SG+10% SF indicated as the best performance in term of ecological impact compared with other mortar mixes. Also, the regression analysis using the integrated AHP and TOPSIS methods gives an effective strategy for the selection of the best mortar mix.
Reference
Al-Hubboubi, S.K., Alwared, A.I. (2018) Effect of Waste Glass Powder as a Supplementary Cementitious Material on the Concrete Mix Properties
Ali, N., Anwer, M., Anjum, M.N. (2015) The Greenhouse Gas Emissions Produced by Cement Production and Its Impact on Environment: A Review of Global Cement Processing. International Journal of Research (IJR), http://internationaljour-nalofresearch.org
Al-Zubaid, A.B., Muttar, K., Ali, I. (2017) Study The Effect of Recycled Glass on The Mechanical Properties of Green Concrete. Energy Procedia, 119: 680-92
Andrew, R. (2018) Global CO2 emissions from cement production. Earth System Science Data, 10: 195-217
ASTM international (2013) Standard Specification for Standard Sand. u: Annual book of ASTM Standards, C778
ASTM international (2013) Standard Test Method for Flow of Hydraulic Cement Mortar. u: Annual book of ASTM Standards, C1437
ASTM international (2013) Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens). u: Annual book of ASTM Standards, C109
ASTM international (2013) Standard Test Method for Ultrasonic Pulse Velocity Test of Concrete. u: Annual book of ASTM Standards, C567
ASTM international (2014) Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars. u: Annual book of ASTM Standards, C348
ASTM international (2013) Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. u: Annual book of ASTM Standards, C642
Babor, D.T., Judele, L. (2014) Environmental Impact of Concrete. Bulletin of the Polytechnic Institute of Jassy, Construction: Architecture Section
Ban, C.C., Ramli, M. (2015) Mechanical Strength and Durability Properties of High Performance Mortar Containing Densified Silica Fume. American Journal of Applied Sciences, 8(1): 82-91
Bignozzi, M.C., Saccani, A., Barbieri, L., Lancellotti, I. (2015) Glass Waste as Supplementary Cementing Materials: The Effects of Glass Chemical Composition. Cement and Concrete Composites, 55: 45-52
Çankaya, S., Pekey, B. (2019) A Comparative Life Cycle Assessment for Sustainable Cement Production in Turkey. Journal of Environmental Management, 249 (August): 109362
Chouhan, P., Jamle, S., Verma, M.P. (2017) Effect of Silica Fume on Strength Parameters Of Concrete As A Partial Substitution of Cement. IJSART, 3: 3-7
Dave, N., Kumar, A., Srivastava, A., Kumar, S. (2016) Experimental Analysis of Strength and Durability Properties of Quaternary Cement Binder and Mortar. Construction and Building Materials, 107: 117-141
Demirboga (2007) Thermal Conductivity and Compressive Strength of Concrete Incorporation with Mineral Admixtures. Building and Environment, 42: 2467-71
Devi, K.S. (2018) Impacts of Cement Industry on Environment: An Overview. Asia Pacific Journal of Research
Douaissia, Z., Merzoud, M. (2019) Effect of Slag and Natural Pozzolan on the Mechanical Behavior of Recycled Glass Mortars. u: Computational Methods and Experimental Testing In Mechanical Engineering, Springer International Publishing
Dubey, S., Singh, A., Kushwah, S.S. (2019) Utilization of Iron and Steel Slag in Building Construction. AIP Conference Proceedings
Đorđević, V.B. (2002) Testing in multiple regression analysis. Facta universitatis - series: Economics and Organization, vol. 1, br. 10, str. 25-29
Galvez-Martos, J., Schoenberger, H. (2014) Resources, Conservation and Recycling an Analysis of the Use of Life Cycle Assessment for Waste Co-Incineration in Cement Kilns. Resources, Conservation & Recycling, 86: 118-149
Huang, C., Feldman, R.F. (1985) Influence of Silica Fume on the Microstructural Development in Cement Mortars. Cement and Concrete Research, 15 (2): 285-94
Hussein, D.R. (2017) Studying the Effect of Iraqi Steel Slag Addition on the Physical and Mechanical Properties Ofcement Mortar. Journal of Engineering and Sustainable Development, 21(3): 2520-0917
IEA (2019) Cement-Tracking Industry. Paris, available at https://www.iea.org/reports/tracking-industry-2019
Imam, A., Kumar, V., Srivastava, V. (2018) Review Study towards Effect of Silica Fume on the Fresh and Hardened Properties of Concrete. Advances in Concrete Construction, 2: 145-57
Islam, I., Rahman,, Das (2011) Strength Behavior of Mortar Using Slag As Partial Replacement of Cement. MIST Journal: GALAXY(DHAKA)
Joshi, R., Banwet, D.K., Shankar, R. (2011) Expert Systems with Applications: A Delphi-AHP-TOP-SIS Based Benchmarking Framework for Performance Improvement of a Cold Chain. Expert Systems With Applications, 38(8): 10170-82
Kamali, M., Ghahremaninezhad, A. (2016) An Investigation into the Hydration and Microstructure of Cement Pastes Modified with Glass Powders. Construction and Building Materials, 112: 915-939
Khazaleh, M. (2019) Eco-Friendly Green Concrete: A Review. u: IAPE '19, Oxford, United Kingdom, 19-21
Kutlu, A.C., Ekmekcioglu, M. (2012) Fuzzy failure modes and effects analysis by using fuzzy TOPSIS/based fuzzy AHP. Expert Systems with Applications, (39): 61-67
Malhotra, K. (2019) Iron and Steel Slag Utilization: A Comprehensive Analysis. International Journal of Engineering Science Invention (IJESI), 8(08): 69-74
Mehta, A., Ashish, D.K. (2019) Silica fume and waste glass in cement concrete production: A review. Journal of Building Engineering
Ministry of Mines-Indian Bureau of Mines (2017) Slag: Iron and Steel. Indian Minerals Yearbook, (0712): 1-11
Mishra,, Siddiqui (2014) A Review On Environmental and Health Impacts Of Cement Manufacturing Emissions. International Journal of Geology, Agriculture and Environmental Sciences, www.woar-journals.org/IJGAES
Muthupriya, P., Vishnuram, B., Subramanian, K. (2008) Prevention of Air Pollution by Using Silica Fume as Cementitious Material. Nature Environment and Pollution Technology, 7(2): 267-70
Myers, R.H. (1990) Classical and modern regression with applications. Boston: PwS-Kent Publishing Company, 2nd ed
Queiroz, W.D., Carlos, J., Rubens, J., Camargo, D. (2013) Waste Materials Co-Processing in Cement Industry: Ecological Efficiency of Waste Reuse. Renewable and Sustainable Energy Reviews, 19: 200-207
Rao, G.A. (2003) Investigations on the Performance of Silica Fume-Incorporated Cement Pastes and Mortars. Cement and Concrete, 33: 171-177
Rashad, A.M. (2014) Recycled Waste Glass as Fine Aggregate Replacement in Cementitious Materials Based on Portland Cement. Construction and Building Materials, 72: 340-57
Roskill Information Services (2017) Outlook for silicon metal diverges sharply from that for ferrosilicon. United Kingdom, available at https://roskill.com/news/outlook-silicon-metal-diverges-sharply-ferrosilicon
Russo, R.de F.S.M., Camanho, R. (2015) Criteria in AHP: A Systematic Review of Literature. Procedia Computer Science, 55(): 1123-1132
Saaty, T.L. (1990) How to make a decision: The analytic hierarchy process. European Journal of Operational Research, 48(1): 9-26
Shao, Y., Lefort, T., Moras, S., Rodriguez, D. (2000) Studies on Concrete Containing Ground Waste Glass. Cement and Concrete Research, 30: 91-100
Shi, C., Zheng, K. (2007) A Review on the Use of Waste Glasses in the Production of Cement and Concrete. Resources, Conservation and Recycling, 52: 234-281
Singh, H., Bansal, S. (2015) Effect of Silica Fume on the Strength of Cement Mortar. International Journal of Research in Engineering and Technology, 623-650
Snellings, R., Mertens, G., Elsen, J. (2001) Supplementary Cementitious Materials. Reviews in Mineralogy & Geochemistry, 74 (Blezard 2001): 211-78
Taylor, M., Tam, C., Gielen, D. (2006) Energy Efficiency and CO2 Emissions from the Global Cement Industry. Paris: International Energy Agency-Energy Technology Policy Division, September: 4-5
Valderrama, C., Grandos, R., Cortina, J.L., Gasol, C.M., Guillem, M., Josa, A. (2012) Implementation of Best Available Techniques in Cement Manufacturing: A Life-Cycle Assessment Study. Journal of Cleaner Production, 25: 60-67
World Bank Group (2019) Trends in Solid Waste Management. available at http://datatopics.worldbank.org/what-a waste/trends_in_solid_waste_management.html
Worrell, E. (2013) Energy Efficiency Improvement and Cost Saving Opportunities for Cement Making: An ENERGY STAR ® Guide for Energy and Plant Manager. United States Environmental Protection Agency
Worrell, E., Price, L., Martin, N., Hendriks, C., Meida, L.O. (2001) Carbon Dioxide Emissions from the Global Cement Industry. Annu. Rev. Energy Environ, 26:303-329. https://www.annualreviews.org
Zhang, Z., Zhang, B., Yan, P. (2016) Comparative Study of Effect of Raw and Densified Silica Fume in the Paste, Mortar and Concrete. Construction & Building Materials, 105: 82-93
Zsuzsanna, T., Marian, L. (2012) Multiple Regression Analysis of Performance Indicators in the Ceramic Industry. Procedia - Social and Behavioral Sciences, 3(12): 188-196
 

O članku

jezik rada: engleski
vrsta rada: izvorni naučni članak
DOI: 10.5937/jaes0-29726
primljen: 05.12.2020.
prihvaćen: 07.02.2021.
objavljen u SCIndeksu: 13.01.2022.
metod recenzije: dvostruko anoniman
Creative Commons License 4.0

Povezani članci

Nema povezanih članaka