Metrika

  • citati u SCIndeksu: 0
  • citati u CrossRef-u:0
  • citati u Google Scholaru:[]
  • posete u poslednjih 30 dana:2
  • preuzimanja u poslednjih 30 dana:1

Sadržaj

članak: 5 od 51  
Back povratak na rezultate
2022, vol. 58, br. 2, str. 285-297
Uticaj količine Y2O3 dodatog leguri MA6000 koja je proizvedena pomoću metode mehaničkog legiranja na habanje
Univerzitet u Karabuku, Tehnološki fakultet, Odsek za proizvodno inženjerstvo, Karabuk, Turska

e-adresadozyurek@karabuk.edu.tr
Ključne reči: Legura dobijena mehaničkim legiranjem; Superlegura; MA6000; Habanje; Y2O3
Sažetak
U ovom radu je prikazano istraživanje karakteristika legure MA6000 (Ni-Cr-Al) sa dodatkom Y2 O3 dobijene postupkom mehaničkog legiranja prilikom habanja. Sinterovana superlegura MA6000-X% Y2O3 je analizirana putem SEM, EDS i XRD analize, kao i merenjem gustine i tvrdoće. Ispitivanje otpornosti na habanje ove legure je sprovedeno u uređaju za ispitivanje otpornosti na habanje. Tokom ispitivanja brzina klizanja je iznosila 1 ms-1 i testovi su se vršili na sobnoj temperaturi. Testovi su izvedeni sa pet različitih rastojanja (200 - 1000 m) i tri različita opterećenja (5 N, 10 N i 15 N). Kao rezultat istraživanja, utvrđeno je da su prahovi superlegure MA6000 sa dodatkom MA homogeni i ljuspičastog oblika. Sa povećanjem količine Y2O3, tvrdoća ove superlegure se povećala sa 267 na 431 Hv, ali gustina je blago opala. U svim kompozicijama su primećene različite intermetalne/karbonske faze, kao što su Ni3 Al i MoC. Testovi habanja su pokazali da su gubitak težine i stopa habanja smanjeni, a da je koeficijent trenja (µ) povećan kada se povećala količina dodatog Y2O3 . Osim toga, utvrđeno je i da se povećanjem primenjenog opterećenja tokom testa habanja povećao gubitak težine, ali da su se stopa habanja i koeficijent trenja (µ) smanjili.
Reference
Amanov, A. (2020) Improvement in mechanical properties and fretting wear of Inconel 718 superalloy by ultrasonic nanocrystal surface modification. Wear, 446-447: 203208-203208
Baker, I., Iliescu, B., Li, J., Frost, H.J. (2008) Experiments and simulations of directionally annealed ODS MA 754. Materials Science and Engineering: A, 492(1-2): 353-363
Banijamali, S.M., Palizdar, Y., Najafi, S., Sheikhani, A., Soltan, A.N.M., Valizadeh, M.P., Torkamani, H. (2021) Effect of CE Addition on the Tribological Behavior of ZK60 Mg-Alloy. Metals and Materials International, 27(8): 2732-2742
Belan, J. (2016) GCP and TCP Phases Presented in Nickel-base Superalloys. Materials Today: Proceedings, 3(4): 936-941
Chen, Y.L., Jones, A.R. (2001) Reduction of porosity in oxide dispersion-strengthened alloys produced by powder metallurgy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 32(8): 2077-2085
Cheng, L., Yu, X., Zhang, J., Li, W., Zhao, C., Wang, Z., Jin, L. (2019) DFT investigations into surface stability and morphology of d-MoC catalyst. Applied Surface Science, 497: 143790-143790
Dreshfield, R.L. (1987) Defects in nickel-base superalloys. JOM, 39(7): 16-21
Ezugwu, E.O., Bonney, J., Yamane, Y. (2003) An overview of the machinability of aeroengine alloys. Journal of Materials Processing Technology, 134(2): 233-253
Frisk, R., Andersson, N.A.I., Rogberg, B. (2019) Cast structure in alloy A286: An iron-nickel based superalloy. Metals, 9(6): 711-711
Gharsallah, H.I., Sekri, A., Azabou, M., Escoda, L., Suñol, J.J., Khitouni, M. (2015) Structural and thermal study of nanocrystalline Fe-Al-B slloy prepared by mechanical alloying. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46(8): 3696-3704
Ghassemi, M., Abouei, V., Moshtaghi, M., Noghani, M. (2015) The effect of removing worn particles by ultrasonic cleaning on the wear characterization of LM13 alloy. Surface Engineering and Applied Electrochemistry, 51(4): 382-388
Gregory, J.K., Gibeling, J.C., Nix, W.D. (1985) High temperature deformation of ultra-fine-grained oxide dispersion strengthened alloys. Metallurgical Transactions A, 16(5): 777-787
Hajizadeh-Oghaz, M., Razavi, R.S., Barekat, M., Naderi, M., Malekzadeh, S., Rezazadeh, M. (2016) Synthesis and characterization of Y2O3 nanoparticles by sol-gel process for transparent ceramics applications. Journal of Sol-Gel Science and Technology, 78(3): 682-691
He, Y.M., Yang, J.G., Chen, S.J., Li, Z., Gao, Z.L. (2016) Effect of high-temperature aging on microstructure and mechanical properties of Ni-Mo-Cr based superalloy subjected to simulated heat-affected zone thermal cycle. Journal of Alloys and Compounds, 660: 266-275
Hoffelner, W., Singer, R.F. (1985) High-cycle fatigue properties of the ODS-alloy MA 6000 at 850 °C. Metallurgical Transactions A, 16(3): 393-399
Ikeno, S., Siota, I., Nobuki, M., Nakamura, M. (1995) Wear properties of oxide dispersion strengthened nickel alloys. Journal of Materials Science, 30(17): 4401-4406
Kang, S.K., Benn, R.C. (1987) Characterization of INCONEL alloy MA 6000 powder. Metallurgical and Materials Transactions A, 18(5): 747-752
Koch, C.C., Whittenberger, J.D. (1996) Mechanical milling/alloying of intermetallics. Intermetallics, 4: 339-335
Korashy, A., Attia, H., Thomson, V., Oskooei, S. (2015) Characterization of fretting wear of cobalt-based superalloys at high temperature for aero-engine combustor components. Wear, 330-331: 327-337
Kosorukova, T., Firstov, G., Noël, H., Ivanchenko, V. (2013) Crystal structure changes in the Ni3Ta intermetallic compound. Chemistry of Metals and Alloys, 6(3/4): 196-199
Kuz'min, M.P., Kuz'mina, M., Kuz'mina, A.S. (2019) Production and properties of aluminum-based composites modified with carbon nanotubes. Materials Today: Proceedings, 19: 1826-1830
Kuz'min, M.P., Ivanov, N.A., Kondrat'ev, V.V., Grigor'ev, V.G., Kuz'mina, M.Y., Begunov, A.I., Kuz'mina, A.S., Ivanchik, N.N. (2018) Preparation of AluminumCarbon Nanotubes Composite Material by Hot Pressing. Metallurgist, 61(9): 815-821
Lee, Y.H., Kim, I.S., Kang, S.S., Chung, H.D. (2001) A study on wear coefficients and mechanisms of steam generator tube materials. Wear, 250(1-12): 718-725
Li, P., Zhang, J., Ma, S., Jin, H., Zhang, Y., Zhang, W. (2018) First-principles investigations on structural, elastic, electronic properties and Debye temperature of orthorhombic Ni3Ta under pressure. Philosophical Magazine, 98(18): 1641-1655
Li, S., Wei, Q., Shi, Y., Chua, C.K., Zhu, Z., Zhang, D. (2015) Microstructure characteristics of Inconel 625 superalloy manufactured by selective laser melting. Journal of Materials Science & Technology, 31(9): 946-952
Liu, Y., Jiang, Y., Feng, J., Zhou, R. (2013) Elasticity, electronic properties and hardness of MoC investigated by first principles calculations. Physica B: Condensed Matter, 419: 45-50
Mujahid, M., Gater, C.A., Martin, J.W. (1998) Microstructural study of a mechanically alloyed ODS superalloy. Journal of Materials Engineering and Performance, 7(4): 524-532
Nganbe, M., Heilmaier, M. (2009) High temperature strength and failure of the Ni-base superalloy PM 3030. International Journal of Plasticity, 25(5): 822-837
Nunomura, Y., Kaneno, Y., Tsuda, H., Takasugi, T. (2004) Phase relation and microstructure in multi-phase intermetallic alloys based on Ni3Al-Ni3Ti-Ni3V pseudo-ternary alloy system. Intermetallics, 12(4): 389-399
Özyürek, D., Yıldırım, M., Çiftçi, İ. (2012) The tribological properties of A356-SiCp metal-matrix composites fabricated by thixomoulding technique. Science and Engineering of Composite Materials, 19(4): 351-356
Palavar, O., Özyürek, D., Kalyon, A. (2015) Artificial neural network prediction of aging effects on the wear behavior of IN706 superalloy. Materials & Design, 82: 164-172
Panagopoulos, C.N., Giannakopoulos, K.I., Saltas, V. (2003) Wear behavior of nickel superalloy: CMSX-186. Materials Letters, 57(29): 4611-4616
Qiao, Y., Sheng, S., Zhang, L., Chen, J., Yang, L., Zhou, H., Wang, Y., Li, H., Zheng, Z. (2021) Friction and wear behaviors of a high nitrogen austenitic stainless steel Fe-19Cr-15Mn-0.66N. Journal of Mining and Metallurgy B: Metallurgy, vol. 57, br. 2, str. 285-293
Raghav, G.R., Balaji, A.N., Selvakumar, N., Muthukrishnan, D., Sajith, E. (2018) Effect of tungsten reinforcement on mechanical, tribological and corrosion behaviour of mechanically alloyed Co-25C Cermet nanocomposites. Materials Research Express, 6(11): 0-23
Raghav, G.R., Balaji, A.N., Muthukrishnan, D.N., Sruthi, V., Sajith, E. (2018) An experimental investigation on wear and corrosion characteristics of Mg-Co nanocomposites. Materials Research Express, 5(6): 0-24
Raghav, G.R., Janardhanan, S., Sajith, E., Chandran, V., Sruthi, V. (2021) Mechanical and tribological performance of Al-Fe-SiC-Zr hybrid composites produced through powder metallurgy process. Materials Research Express, 8(1): 1-13
Sun, D., Liang, C., Shang, J., Yin, J., Song, Y., Li, W., Liang, T., Zhang, X. (2016) Effect of Y2O3 contents on oxidation resistance at 1150 °C and mechanical properties at room temperature of ODS Ni-20Cr-5Al alloy. Applied Surface Science, 385: 587-596
Sundaresan, R., Froes, F.H. (1987) Mechanical alloying. Journal of Metals, 39(8): 22-27
Suryanarayana, C. (2019) Mechanical Alloying: A novel technique to synthesize advanced materials. Research Official Journal of Cast, 2019: 1-17
Szczotok, A., Rodak, K. (2012) Microstructural studies of carbides in MAR-M247 nickel-based superalloy. IOP Conference Series: Materials Science and Engineering, 35(1): 1-11
Thirugnanasambantham, K.G., Natarajan, S. (2016) Mechanistic studies on degradation in sliding wear behavior of IN718 and Hastelloy X superalloys at 500°C. Tribology International, 101: 324-330
Tian, L., Xu, J. (2011) Electrodeposition and characterization of Ni-Y2O3 composite. Applied Surface Science, 257(17): 7615-7620
Tomaszewska, A. (2022) Karakterizacija primarne mikrostrukture superlegure Co-20Ni-9Al-7W-3Re-2Ti (Primary Microstructure Characterization of Co-20Ni-9Al-7W-3Re-2Ti Superalloy). Journal of Mining and Metallurgy B: Metallurgy, 58 (1): 43-49
Ukai, S., Taya, K., Nakamura, K., Aghamiri, M.S., Oono, N., Hayashi, S., Okuda, T. (2018) Directional recrystallization by zone annealing in a Ni-based ODS superalloy. Journal of Alloys and Compounds, 744: 204-210
Vincent, C., Silvain, J.F., Heintz, J.M., Chandra, N. (2012) Effect of porosity on the thermal conductivity of copper processed by powder metallurgy. Journal of Physics and Chemistry of Solids, 73(3): 499-504
Wang, X., Zhou, Y., Zhao, Z., Zhang, Z. (2015) Effects of solutioning on the dissolution and coarsening of g' precipitates in a nickel-based superalloy. Journal of Materials Engineering and Performance, 24(4): 1492-1504
Wu, Q., Song, H., Swindeman, R.W., Shingledecker, J.P., Vasudevan, V.K. (2008) Microstructure of long-term aged IN617 Ni-base superalloy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 39(11): 2569-2585
Xu, Y., Zhang, L., Li, J., Xiao, X., Cao, X., Jia, G., Shen, Z. (2012) Relationship between Ti/Al ratio and stress-rupture properties in nickel-based superalloy. Materials Science and Engineering: A, 544: 48-53
Zhang, L., Chen, X., Li, D., Chen, C., Qu, X., He, X., Li, Z. (2015) A comparative investigation on MIM418 superalloy fabricated using gasand water-atomized powders. Powder Technology, 286: 798-806
Zhao, K., Lou, L.H., Ma, Y.H., Hu, Z.Q. (2008) Effect of minor niobium addition on microstructure of a nickel-base directionally solidified superalloy. Materials Science and Engineering: A, 476(1-2): 372-377
Zhu, G., Zhao, S., Wang, R., Dong, A., Zhang, L., Wu, W., Wang, W., Jiang, S., Pu, Y. (2017) Oxide reinforced Ni base composite prepared by spark plasma sintering. MATEC Web of Conferences, 130: 8-10
 

O članku

jezik rada: engleski
vrsta rada: izvorni naučni članak
DOI: 10.2298/JMMB220113010C
primljen: 13.01.2022.
prihvaćen: 16.06.2022.
objavljen u SCIndeksu: 11.11.2022.
metod recenzije: jednostruko anoniman
Creative Commons License 4.0

Povezani članci

Nema povezanih članaka